Push-and-turn bayonet locking.
Color identification for differentiating fluid connections.
LTA standard and designated LTAX pressure-relief configurations.
External module and chassis connections, equipment-to-pipeline connections and pipeline-to-pipeline connections.
LTA-3, -5, -8, -10, -12, -15 and -20; LTAX-5, -8, -12 and -15.
| Category | Parameter | LTA-3 | LTA/LTAX-5 | LTA/LTAX-8 | LTA/LTAX-10 | LTA/LTAX-12 | LTA/LTAX-15 | LTA/LTAX-20 |
| Performance | Pressure resistance (MPa) | ≥2.25 (hydraulic); ≥1.75 (pneumatic) | ||||||
| Minimum burst pressure (MPa) | 6 | |||||||
| Flow coefficient Kv (m³/h) | 0.22 | 0.72 | 2 | 3.6 | 5.4 | 6.5 | 8.6 | |
| Maximum working flow rate (L/min) | 2.1 | 5.9 | 15 | 23.6 | 33.9 | 53 | 94.2 | |
| Maximum fluid loss per connection/disconnection cycle (mL) | 0.02 | 0.02 | 0.03 | 0.03 | 0.05 | 0.09 | 0.09 | |
| Maximum mating force (N) | 60 | 80 | 90 | 130 | 150 | 180 | 180 | |
| Pressure relief, designated 01-coded self-relieving sockets | 0.2–0.7 MPa. When disconnected, the socket remains sealed at 0–0.2 MPa; relief pressure ≤0.7 MPa. | |||||||
| Environmental | Low temperature | -55 °C | ||||||
| High temperature | +95 °C | |||||||
| Salt spray | ≥96 h | |||||||
| Cyclic damp heat | 240 h | |||||||
| Mechanical | Vibration | GJB 360B-2009, Method 214; no leakage at 1 MPa internal pressure during the specified test. | ||||||
| Shock | GJB 360B-2009, Method 213; no leakage at 1 MPa internal pressure during the specified test. | |||||||
| Mating durability | 1,000 cycles | |||||||
| Materials | Housing | AL: Hard-anodized aluminum alloy; SS: Passivated stainless steel | ||||||
| Seal materials (material temperature ranges) | JE: EPDM (-55 °C to +125 °C) JM: Fluorosilicone rubber (-55 °C to +155 °C) | |||||||
Tailoring connectors to your unique needs.
Provide system-level solutions
Respond to needs within 12 hours